Aeroflex EPDs

Mark Sylvester

Mark Sylvester is a Leadership in Energy and Environmental Design Accredited Professional in Building Design and Construction (LEED AP BD+C) and is Director of Marketing and Technical at AEROFLEX USA.

February 1, 2023

About AEROFLEX® EPDM Closed-Cell Elastomeric Insulation

AEROFLEX® products that offer a product-specific
type III Environmental Product Declaration (EPD)

  • AEROFLEX® Self-Seal™ EPDM Pre-Slit Pipe Insulation
  • AEROFLEX® EPDM Unslit Pipe Insulation
  • AEROFLEX® White/Gray EPDM Unslit Pipe Insulation
  • AEROFLEX® with SaniGuard™ EPDM Jacketed Pipe Insulation
  • AEROFLEX® EPDM Sheet & Roll Insulation
  • AEROFLEX® EPDM Sheet & Roll with PSA Insulation
  • AEROFLEX® AeroFit™ EPDM Fitting Covers
  • AEROFLEX® Aerofix® Insulated Pipe Supports
  • AEROFLEX® Cel-Link II® Glueless Seal Seals
  • AEROFLEX® Protape® EPDM Zero-Perm Rubber Tape
  • AEROFLEX® Aeroseal LVOC™ Black Adhesive
  • AEROFLEX® Aerocoat™ Insulation Coating

Visit: https://aeroflexusa.com/environmental-product-declarations-aeroflex.

  • Pre-slit dual-tape closure system
  • EPDM is nonpolar, hydrophobic
  • IDs: 3/8” – 16” IPS
  • Thicknesses: 3/8” – 2”
  • K-Value = .245 (all thicknesses)
  • Perm Rating = 0.02 perm-inch
  • Upper operating temperature = 257°F (125°C)
  • ASTM E84 25/50 – passes up to 2” thick
  • Noncorrosive on stainless steel
  • Naturally microbial-resistant – no biocides added
  • Cold-weather applications – greater flexibility in cold temperatures
  • LEED-compliant = EPD (product-specific type III), HPD, low-VOC emissions
  • Buy American compliant

Visit https://aeroflexusa.com/environmental-product-declarations-aeroflex to learn more.